B&B Rectangle Actual Noseprint Jewelry

B and BRectangle Actual Noseprint Jewelry

.

Item Number: NP-508/3108

A three dimensional mark etched into the pendant surface of your pet's actual nose print.

Metal Choice: 925 Sterling Silver, Stainless Steel, 14K Solid Yellow Gold, 14K Solid White Gold or Platinum.

Pendant Style: Choose from chamber or no chamber style pendant. Chamber pendants have a discreet inner compartment that is air and water tight when sealed with rubber gasket, threaded-screw closure. No chamber pendants are generally thinner without hollow inside.

Back Options: You may personalize the back with another print (noseprint or pawprint), a photo or a signature for additional cost. Allow 1-7 additional business days for engraving back.

Lifetime promise! The print quality is promised for life. If the print quality ever degrades, we will replace the piece free of charge.

Dimensions:

Chamber style in 925 sterling silver, stainless steel, 14K solid yellow gold, 14K solid white gold and platinum-

25/32" H x 19/32" W x 3/16" thick

(20 mm H x 15 mm W x 5 mm thick).

No chamber style in 925 sterling silver, 14K solid yellow gold, 14K solid white gold and platinum-

25/32" H x 19/32" W x 1/16" thick

(20 mm H x 15 mm W x 1.5 mm thick).

No chamber style in stainless steel-

25/32" H x 19/32" W x 3/32" thick

(20 mm H x 15 mm W x 2 mm thick).

Allow up to 1 business day until pendant ships from the date we receive your fingerprint or other print file.

Allow additional 4-5 weeks for 14K Solid Gold or Platinum orders.

How do I Collect prints? Taking a high resolution digital photo is the easiest way to capture your pet's paw or nose prints and there is no mess! For best results use high resolution setting- photo must be in focus with sharp detail with good exposure (see above paw photo for example). Take several photos and send us the best ones. (Resolution recommendation- 300 dpi or higher or around 2000px x 1500px or higher. If unsure, use the highest resolution setting. JPG format works best).

If using ink prints, we recommend using "baby/child-safe" or "non-toxic" ink pads and plain white paper. Black ink works best. Begin by studying the pawprint of the animal whose print is being taken. Select the area of the paw that is the most interesting. It is generally the area on the center of the paw. This is the area you will want to ink. Practice taking prints on any blank white sheet of paper. Lightly touch the inked surface twice and then press downward on the paper. Use more of a tapping motion than a rolling one. When you are satisfied with the look of the practice prints, place five good prints along the bottom of plain white paper or a white card. Artisans will select the clearest portion of the best print for casting. To scan your print- lay print flat against scanner glass (you may need to apply gentle pressure to scanner lid). Scan at 600 dpi and save in JPG format. Review your prints. If prints look blurry at 100% on screen, you will probably need to adjust your settings.

How to Submit Your Prints

If your file is 1 MB or less, use the File Upload feature. For files larger than 1 MB,

AZ Memorial's unbeatable

pet print jewelry value:

100% satisfaction promise

Free velvet presentation box